19/01/2012
Tonigh change hardware and change connection
for old hardware and internet
PC celeron (Mikrotik x86)
SwitchHUB
For New Hardware
RB 1200
IBM X3200
3com baseline switch managable
ISP Grahamedia 2Mb 1:1
for topologi
steps.
Setting VLAN 3com Baseline Switch 2928 SFP with Mikrotik
1. set vlan in 3com
make trunk in port 1 with VLAN ID 10
and then untagged all port especially port 1
make VLAN in 2-5
tagged port 1 with VLAN 2--5
2. make VLAN in mikrotik, VLAN ID in mikrotik must same with switch 3com
NB: for ip adjusted in Mikrotik setting check ur ip #ip address pr
for setting u can visit http://forummikrotik.com for referensi
Tonigh change hardware and change connection
for old hardware and internet
PC celeron (Mikrotik x86)
SwitchHUB
For New Hardware
RB 1200
IBM X3200
3com baseline switch managable
ISP Grahamedia 2Mb 1:1
for topologi
steps.
Setting VLAN 3com Baseline Switch 2928 SFP with Mikrotik
1. set vlan in 3com
make trunk in port 1 with VLAN ID 10
and then untagged all port especially port 1
make VLAN in 2-5
tagged port 1 with VLAN 2--5
2. make VLAN in mikrotik, VLAN ID in mikrotik must same with switch 3com
NB: for ip adjusted in Mikrotik setting check ur ip #ip address pr
for setting u can visit http://forummikrotik.com for referensi

Comments
Post a Comment